Product Description
CHTR Precision Launches New 6-Meter Single-Piece Rails
TheLubrication ofRolling Linear Guide
The main purpose of linear guides and rails lubrication is to
reduce friction and wear in order to prevent overheating
from destruction of its internal structure which willeffect
the motor function of linear guide. Rolling inear guide
have been filled with high lubricating grease prior to
shippment,to ensure good lubrication during operation,
but in orderto avoid the loss of lubrication caused bythe
lack of lubrication , recommend a regular supplement
when the slider stroke is 50km.When the rounning speed
of linear guide is for high speed (V ≥ 35m/min),
recommend to use of N32 lubrication or connect by pipe
to forced lubrication (show as in picture). For low speed(
V ≤ 35m/min),recommend to use the lithium lubricating
grease
CHTR hg55 linear guides and rails have Five accuracy grades for choose
The accuracy of each type is separated into :Normal, High, Precision,Senior Precisjon,Top Precisjon.
The following are the precision grades recommended for the application.
| Machine Type | Accuracy Class | Machine Type | Accuracy Class | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| N | H | P | SP | UP | N | H | P | SP | UP | ||
| Machining Cwnter | | | √ | √ | | Orthogonal Coordinate | √ | √ | | | |
| Turning Lathe | | | √ | √ | | Cylindrical Coordinate | √ | √ | | | |
| Milling Machine | | | √ | √ | | Line Adapter | | √ | √ | | |
| Boring Machine | | | √ | √ | √ | Detector | | | √ | √ | |
| Jig-Boring Machine | | | | √ | √ | Electronic Component Insertion Machine | √ | √ | | | |
| Grinding Machine | | | √ | √ | √ | Printed Circuit Board Tapping Machine | √ | √ | √ | | |
| Electrical Discharge Machine | | √ | √ | | | Injection Moulding Machine | √ | √ | | | |
| Pressing Machine | | √ | √ | | | Three Dimensional Measuring Instrument | | | √ | √ | |
| Laser Processing Machine | √ | √ | √ | | | Office Machine | √ | √ | | | |
| Woodworking Machine | √ | √ | √ | | | Transmission Machine | √ | √ | | | |
| NC Drilling Machine | | √ | √ | | | XY Work Table | √ | √ | √ | | |
| Tapping Center | | √ | √ | | | Coating Machine | √ | √ | | | |
| Container Switching Device | √ | | | | | Welding Machine | √ | √ | | | |
| ATC | √ | | | | | Medical Machine | √ | √ | | | |
| Wire Eletrical Discharge Machine | | √ | √ | | | Digitizer | √ | √ | √ | | |
| Wheel Dressing Device | | | √ | √ | | Checking Device | | √ | √ | √ | |
Size Accuracy Inspection of TRHG Linear Guide
| ||||||
|---|---|---|---|---|---|---|
| Model Code | Accuracy spefication | Normal | High | Precision | Senior Precision | Top Precision |
| N | H | P | SP | UP | ||
| TRHG55 | allowable error of heightsize M | 0.1 | ±0.05 | 0 -0.05 | 0 -0.03 | 0 -0.02 |
| allowable mutual error of height size M in pairs | 0.03 | 0.015 | 0.007 | 0.005 | 0.003 | |
| allowable error of width size W2 | ±0.1 | ±0.05 | 0 -0.05 | 0 -0.03 | 0 -0.02 | |
| allowablemutua error of width size W2 n pairs | 0.03 | 0.02 | 0.01 | 0.007 | 0.005 | |
Installation Step of Guideway
| A:check the mounting surface
| B:Set thereference side ofguidewayopposite to the reference side of installing step
|
| C:check the position of the bolt hole, to determine the correct position.
| D:Preloading to fix the bolt,make the reference-side of guideway
closely connectto the side of installing step.
|
| E:Finally screw down the bolt
| F:Tightened the fastening screws ofblock in turn
|
| >>More installation methods for linear guide blocks | |
Specificationof TRHG Sereis(High Assembly)
<
 | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Model | Physical Dimension(mm) | Block Dimension(mm) | Crease Nipple Specification | ||||||||||
| M | W | L | B | C | S | L1 | T | T1 | H1 | N | G | ||
| TRHG55AC | 70 | 140 | 166.7 | 116 | 95 | M14 | 117.7 | 29 | 15 | 12.6 | 11 | 16 | G-PT1/8 |
| TRHG55ACL | 70 | 140 | 204.8 | 116 | 95 | M14 | 155.8 | 29 | 15 | 12.6 | 11 | 16 | G-PT1/8 |
| TRHG55B | 80 | 100 | 166.7 | 75 | 75 | M12×18 | 117.7 | 18 | - | 12.6 | 21 | 16 | G-PT1/8 |
| TRHG55BL | 80 | 100 | 204.8 | 75 | 95 | M12×18 | 155.8 | 18 | - | 12.6 | 21 | 16 | G-PT1/8 |
| Model | Rail Dimension(mm) | Basic Load Rating | Allowable Static Moment | Weight | |||||||||
| W1 | W2 | M1 | F | d1×d2×h | Dynamic (KN) | Silence (KN) | MA KN-M | MB KN-M | MC KN-M | Block (kg) | Rail (kg/m) | ||
| TRHG55AC | 53 | 43.5 | 44 | 120 | 16×23×17 | 114.44 | 137 | 4.06 | 2.64 | 5.66 | 4.5 | 15.1 | |
| TRHG55ACL | 53 | 43.5 | 44 | 120 | 16×23×17 | 139.35 | 183 | 7.01 | 4.57 | 7.49 | 5.7 | 15.1 | |
| TRHG55B | 53 | 23.5 | 44 | 120 | 16×23×20 | 114.44 | 227.81 | 4.06 | 4.06 | 5.66 | 4.3 | 15.1 | |
| TRHG55BL | 53 | 23.5 | 44 | 120 | 16×23×20 | 139.35 | 301.26 | 7.01 | 7.01 | 7.49 | 5.4 | 15.1 | |
Related Products
CHTR hgw45cc/hgw45hc/hgr45r hiwin company linear bearing rail
CHTR linear bearing rail as a direct alternative to HIWIN linear guides
CHTR hgw35cc hiwin company linear slide rail china supplier
CHTR inear slide rail as a direct alternative to HIWIN linear guides
CHTR hgr30 hiwin guide rail cnc rail china manufacturing company
CHTR Guide Rails as Replacements for HIWIN Guide Rails
CHTR hiwin hgr25 linear bearings and rails china factory
CHTR Guide Rails as Alternatives to HIWIN Guide Rails